Parts and money零件和钱
What it costs, as far as we've read要花多少钱:目前查到的部分
Prices are in pounds including VAT, read between 2026-10-09 and 2026-10-11. Listed means read on a supplier page on the date the full list gives for that line. A line whose price hasn't been read from a source yet shows "—" and stays out of every total, so each total is a floor ("≥"): the sum of the listed lines only, with how many lines it covers. Shipping and labour are left out.
价格单位为英镑、含增值税,读取于 2026-10-09 至 2026-10-11 之间。标价指在完整清单为该条目注明的日期、从供应商页面上读到的价格。还没从任何来源查到价格的条目显示“—”,不计入任何总数,所以每个总数都只是下限(“≥”):只把有标价的条目加起来,并写明覆盖了几条。运费和人工都不算在内。
2 of 24 lines priced · 22 not yet read24 条中 2 条有标价 · 22 条尚未查价
3 of 31 lines priced · 28 not yet read31 条中 3 条有标价 · 28 条尚未查价
Honest reading: we don't know yet whether SWELL is cheap. The design's cost targets are ≤ £500 for the core and ≤ £650 for the build, with a £1,000 ceiling, but most lines have no price read from a source, so no total is compared with them, or with any other instrument, until every line is priced. Pricing the rest, starting with the filter set, the tube lens and the power and pump electronics, is the next job on this list. The levers named but never pulled: a coloured-glass emission filter with one cheap dichroic, a generic tube lens, a generic 20X objective for the 10× track, and a lab print service that charges only for the filament.
老实说:SWELL 到底便不便宜,我们还不知道。设计的成本目标是核心 ≤ £500、整机 ≤ £650、上限 £1,000,但大多数条目还没从任何来源查到价格,所以在每一条都有价格之前,任何总数都不拿来和目标比,也不和别的仪器比。接下来要做的,就是把剩下的条目查出价格,先查滤光片组、筒镜和电源、水泵电子件。点过名、但从没用上的省钱办法:用有色玻璃发射滤光片配一片便宜的二向色镜、通用筒镜、10× 路线改用通用 20X 物镜,以及只收材料费的实验室打印服务。
| Line编号 | Part零件 | Scope范围 | GBP英镑 | Basis依据 | Part no.零件编号 |
|---|---|---|---|---|---|
| H-15 | Filter set, GFP class (excitation, dichroic, emission)GFP 类滤光片组(激发、二向色、发射) | core核心 | — | not yet read尚未查价 | — |
| H-10 | Objective A: Motic PL 40X/0.65 plan achromat物镜 A:Motic PL 40X/0.65 平场消色差 | core核心 | — | not yet read尚未查价 | PL 40X/0.65/S |
| H-21 | Objective B: Motic PL 20X/0.40 plan achromat物镜 B:Motic PL 20X/0.40 平场消色差 | build整机 | £111 | listed标价 | PL 20X/0.40 |
| H-05 | Raspberry Pi 5, 4 GB树莓派 5(4 GB) | core核心 | £54–£60 | listed标价 | — |
| H-09 | Main camera: IMX296 mono global shutter (Waveshare)主相机:IMX296 黑白全局快门(Waveshare) | core核心 | £49.87 | listed标价 | IMX296-130-BW |
| H-11 | Tube lens: achromatic doublet, f = 100 mm筒镜:消色差双合透镜,焦距 100 mm | core核心 | — | not yet read尚未查价 | AC127-100-A |
| H-23 | Peristaltic pumps (reagent lines and waste)蠕动泵(试剂管路和废液) | build整机 | — | not yet read尚未查价 | — |
| H-28 | 12 V rail for the pumps: MEAN WELL DDR-60G-12 enclosed DC-DC converter水泵的 12 V 电源:MEAN WELL DDR-60G-12 带外壳的 DC-DC 变换器 | build整机 | — | not yet read尚未查价 | DDR-60G-12 |
| H-19 | Certified low-voltage PSU, buck converter, fuses, relay latch, wiring认证低压电源、降压模块、保险丝、继电器锁存、线材 | core核心 | — | not yet read尚未查价 | — |
| H-30 | Closed electronics compartment (the 12 V and 5 V converters out of reach)封闭的电子仓(12 V 和 5 V 变换器放在手够不到的地方) | core核心 | — | not yet read尚未查价 | — |
| H-12 | Overview camera: Raspberry Pi Camera Module 3 + close-up lens全景相机:树莓派 Camera Module 3 + 近摄镜 | core核心 | — | not yet read尚未查价 | SC0872 |
| H-13 | Excitation LED (blue) + constant-current driver激发 LED(蓝光)+ 恒流驱动 | core核心 | — | not yet read尚未查价 | — |
| H-14 | Transmitted white LED + four oblique LEDs for the label-free pre-image (DPC) + drivers透射白光 LED + 四颗斜照 LED(用于膨胀前的免标记图像,DPC)+ 驱动 | core核心 | — | not yet read尚未查价 | — |
| H-18 | Black box + lid microswitch (interlock: LED and motors)黑盒 + 盖子微动开关(联锁:LED 和电机) | core核心 | — | not yet read尚未查价 | — |
| H-03 | 28BYJ-48 steppers with ULN2003 boards28BYJ-48 步进电机 + ULN2003 驱动板 | core核心 | — | not yet read尚未查价 | — |
| H-01 | OpenFlexure v7 printed parts (PLA)OpenFlexure v7 打印件(PLA) | core核心 | — | not yet read尚未查价 | — |
| H-29 | Print service for the printed parts (no printer of your own)打印件交给打印服务商(不用自己的打印机) | core核心 | — | not yet read尚未查价 | — |
| H-20 | Drip ring + objective sleeve + leak sensor接水环 + 物镜护套 + 漏液传感器 | core核心 | — | not yet read尚未查价 | — |
| H-04 | Raspberry Pi Pico 2 (motor, LED and safety controller)树莓派 Pico 2(电机、LED 和安全控制) | core核心 | — | not yet read尚未查价 | — |
The main parts only. In the price column, "—" means the price is not yet read; in the part-number column, that the list gives no part number for that line. The full list, all 45 lines with each one's price basis, supplier, part number and safety rating, is swell-bom-2026-10-11.csv (a CSV file: pm/BOM.csv from the download, after three lines saying what it is, who wrote it and its licence). H-01's optics module is not a stock OpenFlexure part: OpenFlexure's v7 high-resolution module takes a 50 mm tube lens (Thorlabs AC127-050-A, per its build pages, read 10 October 2026), and they list no version for SWELL's 100 mm lens, so a modified module would have to be drawn; none has been. Euro and dollar prices were converted at assumed rates (EUR 0.86, USD 0.75).
这里只列主要零件。价格一栏的“—”表示尚未查价;零件编号一栏的“—”表示清单里这一条没有写零件编号。完整清单共 45 条,含每条的定价依据、供应商、零件编号和安全等级,见 swell-bom-2026-10-11.csv(CSV 文件:下载包里的 pm/BOM.csv,前面加了三行,说明它是什么、谁写的、用什么许可)。H-01 的光学模块不是 OpenFlexure 的标准件:OpenFlexure v7 的高分辨率模块用 50 mm 筒镜(Thorlabs AC127-050-A,见其组装说明,2026 年 10 月 10 日读取),说明里没有适配 SWELL 所用 100 mm 筒镜的版本,所以得另画一个改过的模块;目前还没画。欧元和美元价格按假设汇率换算(EUR 0.86, USD 0.75)。
Safety ratings of the parts零件的安全等级
Where the bill of materials names a maker's part, its rating is read from that maker's own documents: a datasheet, certificate, manual or wiki (read 2026-10-10; H-13's and H-28's on 2026-10-11). Where it names none, or the part carries no rating, the line says what the part must carry: a requirement reasoned from SWELL's safety rules, not a test. Shops named elsewhere on this page are price sources only. An AI gathered these ratings, and a separate AI review re-checked the makers' ratings and the sourced requirements against their documents; the requirements marked "no document" were checked for wording only. No person has checked them.
清单里点名了厂商零件的,安全等级读自该厂商自己的文件:数据表、证书、说明书或维基(于 2026-10-10 读取;H-13 和 H-28 的于 2026-10-11 读取)。没点名、或者零件本身没有等级的,写明这个零件必须达到的要求:这是依据 SWELL 的安全规则推出的要求,不是测试结果。本页别处提到的商店只作价格来源。这些等级由 AI 收集,另一轮 AI 审查对照原始文件核对了厂商等级和有出处的要求;标着“没有文件出处”的要求只核对了措辞。还没有人工核对过。
| Line编号 | Part零件 | Safety rating安全等级 | Source出处 |
|---|---|---|---|
| H-02 | OpenFlexure fixings: screws, nuts, washers, bands, insertsOpenFlexure 紧固件:螺丝、螺母、垫圈、橡皮圈、铜螺母 | Small loose parts (screws, nuts, washers, inserts, bands): a choking hazard, so adult assembly, away from under-threes.零碎小件(螺丝、螺母、垫圈、铜螺母、橡皮圈)有窒息风险:由成年人组装,远离三岁以下儿童。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-03 | 28BYJ-48 steppers with ULN2003 boards28BYJ-48 步进电机 + ULN2003 驱动板 | Run from the instrument's fused 5 V rail; the gears they drive sit under fixed printed covers (H-27), and opening the lid cuts their supply.由仪器带保险丝的 5 V 电源轨供电;它们带动的齿轮装在固定的打印护罩(H-27)里,一开盖就切断它们的电源。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-04 | Raspberry Pi Pico 2树莓派 Pico 2 | Raspberry Pi: 1.8–5.5 V DC input; any external supply must be a limited power source or PS2 under IEC 62368-1.树莓派:输入 1.8–5.5 V 直流;任何外接电源都必须是 IEC 62368-1 规定的限功率电源或 PS2。 maker's document厂商文件 | Raspberry Pi Ltd, Raspberry Pi Pico 2 series product brief, Published March 2026 (file RP-008302-DS-2). pip-assets.raspberrypi.comRaspberry Pi Ltd,Raspberry Pi Pico 2 series product brief,Published March 2026 (file RP-008302-DS-2)。pip-assets.raspberrypi.com |
| H-05 | Raspberry Pi 5, 4 GB树莓派 5(4 GB) | Raspberry Pi: 5 V/5 A DC via USB-C; CB test certificate DK-147036-UL: a tested sample conforms to IEC 62368-1:2018.树莓派:经 USB-C 输入 5 V/5 A 直流;CB 测试证书 DK-147036-UL:送测样品符合 IEC 62368-1:2018。 maker's document厂商文件 | Raspberry Pi Ltd, Raspberry Pi 5 product brief, Published October 2026 (file RP-008348-DS-8). pip-assets.raspberrypi.com · Raspberry Pi Ltd (Product Information Portal); certificate issued by a UL National Certification Body, rpi-5 Electrical Safety Certification Body (CB) Certificate, dated 2023-11-07. pip-assets.raspberrypi.comRaspberry Pi Ltd,Raspberry Pi 5 product brief,Published October 2026 (file RP-008348-DS-8)。pip-assets.raspberrypi.com · Raspberry Pi Ltd (Product Information Portal); certificate issued by a UL National Certification Body,rpi-5 Electrical Safety Certification Body (CB) Certificate,dated 2023-11-07。pip-assets.raspberrypi.com |
| H-06 | Raspberry Pi 27 W USB-C power supply树莓派 27 W USB-C 电源 | Plug-in mains adapter, 100–240 V AC in; USB-C PD out 5.1 V 5 A, up to 15 V 1.8 A; CB-certified to IEC 62368-1:2018.插墙式市电适配器,输入 100–240 V 交流;USB-C PD 输出 5.1 V 5 A,最高 15 V 1.8 A;按 IEC 62368-1:2018 取得 CB 认证。 maker's document厂商文件 | Raspberry Pi Ltd (Product Information Portal); certificate issued by UL Solutions, rpi-27W-PSU IEC CB Scheme Grant (CB test certificate), CB test certificate DK-145484-UL, dated 2023-09-20. pip-assets.raspberrypi.com · Raspberry Pi Ltd, Raspberry Pi 27W USB-C Power Supply product brief, Published October 2023. datasheets.raspberrypi.comRaspberry Pi Ltd (Product Information Portal); certificate issued by UL Solutions,rpi-27W-PSU IEC CB Scheme Grant (CB test certificate),CB test certificate DK-145484-UL, dated 2023-09-20。pip-assets.raspberrypi.com · Raspberry Pi Ltd,Raspberry Pi 27W USB-C Power Supply product brief,Published October 2023。datasheets.raspberrypi.com |
| H-08 | Raspberry Pi 5 active cooler树莓派 5 主动散热器 | Raspberry Pi: 5 V DC from the Pi 5's fan header; its metal parts can get hot, and the fan isn't to be touched while powered.树莓派:由 Pi 5 的风扇接口供 5 V 直流;金属部件会发烫,通电时不要碰风扇。 maker's document厂商文件 | Raspberry Pi Ltd, Raspberry Pi Active Cooler for Raspberry Pi 5 product brief, Published January 2026 (file RP-008188-DS-2). pip-assets.raspberrypi.comRaspberry Pi Ltd,Raspberry Pi Active Cooler for Raspberry Pi 5 product brief,Published January 2026 (file RP-008188-DS-2)。pip-assets.raspberrypi.com |
| H-11 | Tube lens: achromatic doublet筒镜:消色差双合透镜 | Loose glass lens that can focus sunlight: keep it mounted in the tube and never aim it at the sun.单独的玻璃透镜能聚焦阳光:一直装在镜筒里,绝不对着太阳。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-12 | Overview camera: Camera Module 3 + close-up lens全景相机:Camera Module 3 + 近摄镜 | Camera Module 3 has no safety rating; connect it only with the Pi shut down and unplugged. Close-up lens not chosen: never aim it at the sun.Camera Module 3 没有安全等级;只在树莓派关机并拔掉电源后再接线。近摄镜尚未选定:绝不对着太阳。 requirement; no maker rating要求;无厂商等级 | Raspberry Pi Ltd, Raspberry Pi Camera Module 3 product brief, Published June 2024 (file RP-008151-DS-1). pip-assets.raspberrypi.comRaspberry Pi Ltd,Raspberry Pi Camera Module 3 product brief,Published June 2024 (file RP-008151-DS-1)。pip-assets.raspberrypi.com |
| H-13 | Excitation LED (blue) + constant-current driver激发 LED(蓝光)+ 恒流驱动 | Driver (Mean Well LDD-350HW, the version with 22 AWG leads fitted): 9–56 V DC in, 350 mA constant current, short-circuit and over-temperature protected. LED not chosen: needs its maker's IEC 62471 risk group.驱动(Mean Well LDD-350HW,自带 22 AWG 引线的型号):输入 9–56 V 直流,恒流 350 mA,带短路和过温保护。LED 尚未选定:需要其厂商给出 IEC 62471 风险组别。 maker's document厂商文件 | MEAN WELL, LDD-H series DC-DC Constant Current Step-Down LED driver specification, File Name: LDD-H-SPEC 2022-05-24. meanwell.com · International Electrotechnical Commission (IEC webstore), IEC 62471:2006 Photobiological safety of lamps and lamp systems (catalogue entry), IEC 62471:2006, edition 1.0, publication date 2006-07-26. webstore.iec.chMEAN WELL,LDD-H series DC-DC Constant Current Step-Down LED driver specification,File Name: LDD-H-SPEC 2022-05-24。meanwell.com · International Electrotechnical Commission (IEC webstore),IEC 62471:2006 Photobiological safety of lamps and lamp systems (catalogue entry),IEC 62471:2006, edition 1.0, publication date 2006-07-26。webstore.iec.ch |
| H-14 | White and oblique LEDs + drivers白光 LED 和斜照 LED + 驱动 | Not chosen: each LED's maker must state its IEC 62471 risk group, and only LEDs it rates safe to look into qualify, because the lid interlock covers only the excitation LED; constant-current drivers on the fused 24 V-or-less supply.尚未选定:每颗 LED 的厂商都必须给出 IEC 62471 风险组别,而且只有厂商认定可以直视的 LED 才能用,因为盖子联锁只管激发 LED;恒流驱动接在带保险丝、不超过 24 V 的电源上。 requirement; no maker rating要求;无厂商等级 | International Electrotechnical Commission (IEC webstore), IEC 62471:2006 Photobiological safety of lamps and lamp systems (catalogue entry), IEC 62471:2006, edition 1.0, publication date 2006-07-26. webstore.iec.chInternational Electrotechnical Commission (IEC webstore),IEC 62471:2006 Photobiological safety of lamps and lamp systems (catalogue entry),IEC 62471:2006, edition 1.0, publication date 2006-07-26。webstore.iec.ch |
| H-15 | Filter set (excitation, dichroic, emission)滤光片组(激发、二向色、发射) | Not chosen: glass filters and dichroic are fitted by an adult and held in their mounts inside the closed box.尚未选定:玻璃滤光片和二向色镜由成年人装进支架,固定在密闭的盒子里。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-17 | C12 chamber + kinematic dish holder (magnets, balls)C12 样品室 + 运动学定位托(磁铁、钢珠) | Not chosen: magnets within EN 71's flux limit, held captive or enclosed so they can't come loose; balls are small parts; adult assembly; coverslip adult-only.尚未选定:磁铁要在 EN 71 的磁通限值以内,并被卡住或封闭,不会脱落;钢珠属于小零件;由成年人组装;盖玻片只由成年人处理。 requirement; no maker rating要求;无厂商等级 | Office for Product Safety and Standards (GOV.UK), Product Safety Alert: Small, High-Powered Magnetic Products (PSA1), Published 5 April 2022; date of issue 19 May 2021. gov.ukOffice for Product Safety and Standards (GOV.UK),Product Safety Alert: Small, High-Powered Magnetic Products (PSA1),Published 5 April 2022; date of issue 19 May 2021。gov.uk |
| H-18 | Black box + lid microswitch (interlock: LED and motors)黑盒 + 盖子微动开关(联锁:LED 和电机) | Not chosen: a two-pole switch, its contacts rated above the LED supply and the relay coil it drives; one pole cuts the LED, the other opens a relay that stops every motor, and an open lid or a broken wire does both.尚未选定:双刀开关,触点的额定值要高于 LED 电源和它驱动的继电器线圈;一刀切断 LED,另一刀让继电器断开、所有电机停下;开盖或断线都会同时做到这两件事。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-19 | Low-voltage supply, buck converter, fuses, relay latch, wiring低压电源、降压模块、保险丝、继电器锁存、线材 | Not chosen: a certified plug-in adapter (IEC 62368-1), 24 V DC or less out; a fuse on every rail; every part rated for its rail's voltage and current; the 5 V converter an enclosed DIN-rail module like H-28, and it, the fuses and the relay board sit in the closed electronics compartment (H-30); every join the builder makes a screw or lever terminal (H-31) or a ready-made plug-in lead; the 24 V fuse a time-delay type that rides through the converters' inrush. The 12 V pumps (H-23) get their rail from H-28.尚未选定:认证的插墙式适配器(IEC 62368-1),输出不超过 24 V 直流;每一路都有保险丝;每个零件的额定值都要匹配所在电源轨的电压和电流;5 V 降压用像 H-28 那样带外壳的导轨式模块,它和保险丝、继电器板都装在封闭的电子仓(H-30)里;造的人接的每个接头,都用螺丝端子、杠杆式接线端子(H-31)或现成的插头线;24 V 保险丝用慢断型,能扛住变换器开机时的冲击电流。12 V 的水泵(H-23)由 H-28 供电。 requirement; no maker rating要求;无厂商等级 | Raspberry Pi Ltd, Raspberry Pi Pico 2 series product brief, Published March 2026 (file RP-008302-DS-2). pip-assets.raspberrypi.comRaspberry Pi Ltd,Raspberry Pi Pico 2 series product brief,Published March 2026 (file RP-008302-DS-2)。pip-assets.raspberrypi.com |
| H-20 | Drip ring + objective sleeve + leak sensor接水环 + 物镜护套 + 漏液传感器 | Leak sensor not chosen: runs on the low-voltage logic rail, and its trip opens the hardware latch directly (INV-1, INV-3).漏液传感器尚未选定:接在低压逻辑电源上,一旦触发就直接断开硬件锁存(INV-1、INV-3)。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-22 | Cartridge: body, glass floor, seals, mesh guard, weir试剂盒:盒体、玻璃底、密封件、网罩、溢流堰 | Not chosen: body and seals rated compatible with every liquid it holds, so it can't leak over the optics; glass floor is adult-only.尚未选定:盒体和密封件要经确认能耐所装的每一种液体,免得漏到光学部件上;玻璃底只由成年人处理。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-23 | Peristaltic pumps蠕动泵 | Not chosen: 12 V DC motors on the fused 12 V rail (H-28), each roller head enclosed by its maker's cover, stopped by the lid interlock and by the hardware leak latch (INV-3).尚未选定:12 V 直流电机,接在带保险丝的 12 V 电源轨(H-28)上,每个滚轮头都由厂商自带的外壳罩住,开盖联锁和硬件漏液锁存都能让它停机(INV-3)。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-24 | Tubing and connectors管路和接头 | Not chosen: tubing and fittings rated by their maker as compatible with every liquid they carry, so they don't soften, crack or leak.尚未选定:管路和接头要由厂商确认能耐所输送的每一种液体,不会变软、开裂或漏液。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-25 | Leak sensors + waste overfill sensor漏液传感器 + 废液满溢传感器 | Not chosen: low-voltage sensors on the logic rail; each trip opens the hardware latch that cuts pumps, heaters and the LED (INV-3).尚未选定:低压传感器接在逻辑电源上;每次触发都会断开切断水泵、加热器和 LED 的硬件锁存(INV-3)。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-26 | Pump and LED driver board (MOSFET)水泵和 LED 驱动板(MOSFET) | Not chosen: each switch rated well above 24 V and its load current, flyback diodes on the pumps; the LED stays behind the interlock and latch.尚未选定:每个开关的额定值都要远高于 24 V 和所带负载的电流,水泵加续流二极管;LED 始终在联锁和锁存之后。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-27 | Printed gear guards (PLA)打印的齿轮护罩(PLA) | Not drawn yet: printed PLA covers fixed over the steppers' gears, removable only with a tool, so fingers and hair can't reach the gears; fitted by an adult.尚未画出:固定在步进电机齿轮外的 PLA 打印护罩,只有用工具才能拆下,手指和头发碰不到齿轮;由成年人安装。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-28 | 12 V rail for the pumps: MEAN WELL DDR-60G-12 enclosed DC-DC converter水泵的 12 V 电源:MEAN WELL DDR-60G-12 带外壳的 DC-DC 变换器 | MEAN WELL DDR-60G-12: 9–36 V DC in, 12 V DC out at up to 5 A (60 W); short-circuit, overload, over-voltage, input reverse-polarity and under-voltage protection; approved to IEC 62368-1 and UL 62368-1; an enclosed converter with screw terminals, cooled by free air (full load up to 60 °C ambient above 18 V input). It sits on a DIN rail inside the closed electronics compartment (H-30), out of reach, and its output to the pumps passes through the lid relay and the leak latch.MEAN WELL DDR-60G-12:输入 9–36 V 直流,输出 12 V 直流、最大 5 A(60 W);带短路、过载、过压、输入反接和欠压保护;通过 IEC 62368-1 和 UL 62368-1 认证;带外壳、用螺丝端子接线的变换器,靠自然对流散热(输入高于 18 V 时,环境温度 60 °C 以下可以满载)。它装在封闭电子仓(H-30)里的导轨上,手够不到;给水泵的输出经过开盖继电器和漏液锁存。 maker's document厂商文件 | MEAN WELL, DDR-60 series 60W DIN Rail Type DC-DC Converter specification (2026-03-31). meanwell.comMEAN WELL,DDR-60 series 60W DIN Rail Type DC-DC Converter 规格书(2026-03-31)。meanwell.com |
| H-29 | Print service for the printed parts打印件的打印服务 | The builder doesn't run a printer: a print service prints the parts, and they arrive cold, to be fitted by an adult.造的人不用自己开打印机:零件由打印服务商打印,送到时是凉的,由成年人安装。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-30 | Closed electronics compartment封闭的电子仓 | Not chosen: a closed compartment that opens only with a screwdriver and is opened only with the supply unplugged (a rule, not an interlock), with no opening wider than 2.5 mm and vents for free-air cooling; metal, or plastic rated UL94 V-0. It keeps H-28 and the 5 V converter out of reach.尚未选定:封闭的电子仓,只能用螺丝刀打开,而且必须先拔掉电源再打开(这是规定,不是联锁装置);所有开口都不宽于 2.5 mm,留有自然散热的通风口;金属外壳,或阻燃等级 UL94 V-0 的塑料。H-28 和 5 V 降压模块都装在里面,手够不到。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| H-31 | Solderless joins: lever connectors and screw terminals免焊接头:杠杆式接线端子和螺丝端子 | Not chosen: lever connectors and screw terminal blocks, each rated above its rail's voltage and current and for its wire's size: no soldering and no crimping anywhere in the build.尚未选定:杠杆式接线端子和螺丝接线端子,每个的额定值都要高于所在电源轨的电压和电流,并匹配所接导线的粗细:整个制作过程不用焊接,也不用压接。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| C-01 | Stage micrometer台微尺 | Not chosen: a glass slide, so adult handling only; no electrical, optical or chemical hazard.尚未选定:玻璃载片,只由成年人处理;没有电气、光学或化学危害。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| C-02 | USAF 1951 resolution target (glass)USAF 1951 分辨率靶(玻璃) | Not chosen: a glass target, so adult handling only; no electrical, optical or chemical hazard.尚未选定:玻璃靶,只由成年人处理;没有电气、光学或化学危害。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| C-03 | Fluorescent beads, 100–200 nm荧光微球(100–200 nm) | Thermo Fisher SDS: not classified as hazardous, no H-statements. Its user guide: most FluoSpheres carry 2 mM azide or 0.02% thimerosal as preservative.Thermo Fisher 的 SDS:未列为危险品,没有 H 说明。其用户指南:大多数 FluoSpheres 含 2 mM 叠氮化物或 0.02% 硫柳汞作防腐剂。 maker's document厂商文件 | Life Technologies Corporation (Thermo Fisher Scientific), Safety Data Sheet, F8803 FluoSpheres carboxylate-modified microspheres, 0.1 µm, yellow-green (North American SDS), Revision number 3, revision date 16-Aug-2024. assets.thermofisher.com · Thermo Fisher Scientific, FluoSpheres user guide, Pub. No. MAN0001849, Rev. B.0. assets.thermofisher.comLife Technologies Corporation (Thermo Fisher Scientific),Safety Data Sheet, F8803 FluoSpheres carboxylate-modified microspheres, 0.1 µm, yellow-green (North American SDS),Revision number 3, revision date 16-Aug-2024。assets.thermofisher.com · Thermo Fisher Scientific,FluoSpheres user guide, Pub. No. MAN0001849,Rev. B.0。assets.thermofisher.com |
| C-04 | Uniform fluorescent reference (flat-field)均匀荧光参考片(平场) | Not chosen: prefer a solid fluorescent slide; any liquid or dye reference needs its maker's SDS cited and stays in the lab.尚未选定:优先用固体荧光片;任何液体或染料参考都要引用其厂商的 SDS,并且只留在实验室。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| T-03 | Multimeter: UNI-T UT61E+万用表:UNI-T UT61E+ | UNI-T: built to IEC 61010-1, CAT III 1000 V / CAT IV 600 V. In SWELL it measures only the 24 V-or-less DC circuits.UNI-T:按 IEC 61010-1 制造,CAT III 1000 V / CAT IV 600 V。在 SWELL 里它只测不超过 24 V 的直流电路。 maker's document厂商文件 | UNI-T (Uni-Trend), UT61+ Series 1000V True RMS Digital Multimeter user manual (UT61B+/UT61D+/UT61E+), P/N:110401109614X (no date printed). meters.uni-trend.comUNI-T (Uni-Trend),UT61+ Series 1000V True RMS Digital Multimeter user manual (UT61B+/UT61D+/UT61E+),P/N:110401109614X (no date printed)。meters.uni-trend.com |
| T-04 | Hand tools手工工具 | Cutters and wire strippers have blades and fine tweezers are pointed: adult use only.剪线钳和剥线钳带刀刃,细镊子带尖:只由成年人使用。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| W-01 | Reagents, first fill试剂(首批) | Lab only: the supplier SDS of each hazardous reagent is cited on the SWELL page's safety table and in SAFETY.md (read 2026-10-10); none yet for the dye (not chosen), poly-L-lysine or PBS; several are CMR.仅限实验室:各危险试剂的供应商 SDS 都已在 SWELL 页面的安全表和 SAFETY.md 里引用(2026-10-10 读取);染料(尚未选定)、聚赖氨酸和 PBS 还没有;其中几种是 CMR 物质。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| W-02 | Coverslips, glass-bottom dishes, punches, gloves盖玻片、玻璃底培养皿、打孔器、手套 | Lab only: coverslips, glass-bottom dishes and punches are sharp (adults); gloves are the chemical-resistant kind each reagent's SDS names.仅限实验室:盖玻片、玻璃底培养皿和打孔器都锋利(只由成年人处理);手套要用各试剂 SDS 指定的耐化学品类型。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
| W-03 | Host-lab equipment: pipettes, centrifuge, 95 °C block, incubator实验室设备:移液器、离心机、95 °C 加热块、培养箱 | The host lab's own equipment, used as its makers intend: the 95 °C block can scald and burn; centrifuges stay lidded while spinning.实验室自己的设备,按厂商的用途使用:95 °C 加热块会烫伤;离心机运转时盖子不打开。 requirement; no maker rating要求;无厂商等级 | Reasoned from SWELL's safety rules; no document.依据 SWELL 的安全规则推出;没有文件出处。 |
Everything else a first build would need第一次造还需要的其他开销
| Basket类别 | GBP (listed lines only)英镑(只算有标价的条目) | Not yet read / all lines尚未查价条目 / 全部条目 |
|---|---|---|
| Calibration: stage micrometer, resolution target, fluorescent beads, flat-field reference标定:台微尺、分辨率靶、荧光微球、平场参考片 | — | 4 / 4 |
| Tools, only if the lab has none: multimeter, hand tools (no hot tools)工具(仅在实验室没有时):万用表、手工工具(不用发热的工具) | ≥ £69 | 1 / 2 |
| Operations: data drive, host-lab access for six months (community-lab case), waste route运行:数据硬盘、六个月实验室使用费(按社区实验室算)、废液处理 | ≥ £240 | 2 / 3 |
| Wet lab, bought through a host lab: reagents and consumables湿实验(经由实验室购买):试剂和耗材 | — | 3 / 3 |
| Whole project, excluding tools整个项目(不含工具) | ≥ £454 | 37 / 41 |
Where the chemistry happens化学部分在哪做
Finding a suitable lab, anywhere在任何地方找合适的实验室
The gel chemistry belongs only in an equipped, supervised laboratory that works under its own safety rules. We name no labs here: this is the list of what to ask one for. Nobody has been contacted about SWELL.
凝胶化学只能在设备齐全、有人监督、按自身安全规程运作的实验室里做。这里不点名任何实验室,只列出该向实验室确认的事项。关于 SWELL,我们没有联系过任何人。
- A fume hood, or local exhaust ventilation, for weighing powders and for the formaldehyde and monomer steps.有通风橱或局部排风,用来称粉末、做甲醛和单体相关步骤。
- Written permission for these reagents: acrylamide, bis-acrylamide and formaldehyde (CMR substances), APS, TEMED, sodium acrylate, imidazole, an SDS buffer at 95 °C and NHS-ester dyes in DMSO.书面同意使用这些试剂:丙烯酰胺、双丙烯酰胺和甲醛(CMR 物质),过硫酸铵、TEMED、丙烯酸钠、咪唑、95 °C 的 SDS 缓冲液,以及溶在 DMSO 里的 NHS 酯染料。
- A hazardous-waste route for liquids and polymerised gels, and what it costs.液体废物和聚合后凝胶的危废处理渠道,以及费用。
- An ordering route: the lab orders the CMR reagents, because suppliers may not sell them to private individuals. Never present yourself as a business if you are not one.采购渠道:由实验室订购 CMR 试剂,因为供应商可能不卖给个人。不是公司就绝不要冒充公司。
- Lockable chemical storage, and fridge and freezer space for reagents and gels.可上锁的化学品柜,以及存放试剂和凝胶的冷藏、冷冻空间。
- Basic equipment: pipettes, a mini-centrifuge, a heat block reaching 95 °C, an incubator, a balance and a pH meter.基本设备:移液器、迷你离心机、能到 95 °C 的加热块、培养箱、天平、pH 计。
- Bench space for a small low-voltage microscope for a few months, under the lab's own induction, risk assessments and lone-working rules.能放一台小型低压显微镜几个月的台面,并遵守该实验室自己的入门培训、风险评估和单人作业规定。
- Then choose: among the labs that confirm the first four points, the cheapest that can start when you need it.最后挑选:在前四条都确认没问题的实验室里,选能按你的时间开始、费用最低的一家。